This is a cover plate/ Template drill guide. You replace your X axis belt clamps with this item then drill your leadscrews holes in the side pannels. When your done just leave the template in the place of the old clamps as a dust cover.

$ 9.00 To Have Item Printed (2x set)
LEAD SCREW TEMPLATE A&B.STL
This is the Nema 17 motor coupler for the project. 100% pla infill.

$ 20.00 To Have Item Printed
NEMA 17 COUPLER.STL
This is the X Axis drag chain block. It had to be reduced in size to fit the leadscrew conversion.25% pla infill.

$ 15.00 To Have Item Printed
X AXIS DRAG CHAIN BLOCK.STL
After you use the lead screw drill template. You leave the drill bit in the hole and use this template on the oppisite side with holes A on one side to be drilled and B to be drilled on the other side. 50% pla infill.

$ 12.00 To Have Item Printed
X AXIS DRILL TEMPLATE LEADSCREW BEARING BLOCKS A&B.STL
This is X axis leadscrew bearing block A. This is the block that holds your nema 17 coupler as well. 50% pla infill.

$20.00 To Have Item Printed
X AXIS LEAD SCREW BEARING BLOCK A.STL
This is leadscrew bearing block B. This will be at the other end of block A on teh Leadscrew. 50% pla infill.

$15.00 To Have Item Printed
X AXIS LEAD SCREW BEARING BLOCK B.STL
This is your leadscrew nut holder. one side is labled 11mm and the other 10mm. you can flip the block to the side that fits the best when mounting it to its holder block. 75% pla infill.

$ 15.00 To Have Item Printed
X AXIS LEAD SCREW NUT HOLDER.STL
This part holds your leadscrew nut holder. You will need 2x 3/16 machine screws 1 1/2 inchs long, with nuts to attach the two parts. 75%pla infill.

$35.00 To Have Item Printed
X AXIS NUT BLOCK.STL
This box was created to make a place to hold your wires to make new connections after you pull your X axis steeper wires out of the drag chain to attach them to the motor in the new motor placement area.

$ 30.00 To Have Item Printed
X AXIS WIRE BOX.STL
Here is a few photos of the process of this upgrade unit being built! And a quick how to! How to here!